|
| Place of Origin: | China |
| Brand Name: | Huitian |
| Certification: | ISO |
| Model Number: | 919 |
919 Polyurethane Sealant, PU sealant, interior, locomotive, ship, container,metal plate
919 is a single component, White, medium viscosity, high-strength, low odor polyurethane adhesive. Touch dry and depth of fast curing time, appearance and no particles, after curing, polishing, painting. Can be easy to be repaired, water resistance, excellent low temperature performance.
Typical use
Seam for filling the bus interior, locomotive, ship, container, cold storage and other parts of the.
Characteristic before curing
A component Representative value range
Color White
Density g/cm3( ℃) 1.30 1.2～1.4
(GB/T13354-1992)
Touch Curing(min) 35 20～60
(23℃/50%RH)
(GB/T13477.5-20)
Characteristic after curing
Tensile strength MPa 2.5 ≥1. 5
(GB/T528-1998)
Elongation at break (%) 400 ≥300
(GB/T528-1998)
Tear strength KN/m 11 ≥10
(GB/T 529)
Harness: Shore-D (GB/T 531-1999) 55 30-60
Work Temperature( ℃) -40～90
Instructions for use
Surface cleaning: clean surface: remove the rust, dirt, water and oil etc..
Sizing: cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.
Curing: a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.
Polyurethane adhesive in sizing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.
Storage: unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.
The matters needing attention
Keep away from children.
If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.
If the case of contact with eyes, rinse immediately with water, and medical treatment.
Recommended for use in a well ventilated place
Product safety data please refer to the product MSDS.
Package
310ml/Tube,24tube/Carton
Storage
Store in cool and dry place 5-25 C
Storage period: hard pack for 9 month
| 310ml/Tube | |
| 24tube/Carton |
400 ml/sausage |
