Brand List
MS7930 MS Polymer Sealant For Construction Environmental Protection
MS7930 MS polymer sealant for construction, sealing and bonding in housing area, environmental protection
7930(HT9301MS) MS sealant is a silicon alkyl terminated polyether as a main component, low viscosity, general type of one component moisture curable sealant.
Curing material combines the advantages of polyurethane and silicone adhesive sealant products.
Typical use
Preliminary fixed the sealing of joints, such as weld seam sealing, etc.
Wide Application
Characteristics before curing
Color:
white/Black/Grey
Base material:
Silane modified polyether
Density (g/cm3):
1.38g/cc
Tack free time (min):
20minutes
Pressure flow viscosity(s/10g):
6
Characteristics after curing
Room temperature vulcanized depth
(mm/24h)
3
Tensile strength(MPa)
(GB/T528-1998)
1.2
elongation at break (%)
(GB/T528-1998)
450
Hardness(ShA)
(GB/T531-1999)
30
Work temperature(℃)
-40~100
Short use temperature(℃)
120
Instructions for use
Clean :Clean the surface: remove the rust, dust and oil etc...
Gluing: The nozzle sleeve cut, take the glue mouth, cut into appropriate slope,
using squeeze can glue gun is coated onto the construction site;
pneumatic pressure recommended that no more than 0.4MPa sizing.
Curing : The parts are arranged in the air sizing, when after the formation of epidermis,
from the surface to the interior of a room temperature curing, and 55% relative humidity at 24 hours,
the curing depth of 2 ~ 4mm. With the extension of time, the curing depth increases gradually.
The 7 day curing depth 6mm.
Attention
Keep away from children.
If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.
If the case of contact with eyes, rinse immediately with water, and medical treatment.
Recommended for use in a well ventilated place
Package
White:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Black:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Grey:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Storage
310ml/Cartridge 12months
Cartridge User Guide:
Sausage User Guide:
Huitian China 5 Production Plants
Hubei Plant -- Construction Adhesive&Sealants /Car care adhesive
Guangzhou Plant -- Electronics adhesive
Changzhou Plant -- Photovoltaic adhesive
Shanghai Plant -- Packing adheisve
Yicheng Plant --Packing adheisve
Global Clients
FAQ:
1.Q:Delivery time ?
A: Normally,delivery time of sample order is within 7 days.
standard order is within 15 days.
2.Q:How to get samples ?
A: Normally,we offer 1-2pcs or 50-100g free samples for quality testing.
3.Q:How to be Our distributor ?
A: As the growing of Our global business,we need to find more and more distributors and agents
worldwide. Huitian will provide the best solution and service for our partners.
4.Q:Any OEM service ?
A: Yes. we can offer the customer OEM label service,and will give the protection of the your right in your market.
5.Q:Do you have MOQ ?
A:Yes.Normally,MOQ is 500pcs.
1420 Structural Acrylic Adhesive Bonding Industrial Adhesive Glue For Transport Vehicles
1420 High performance structural bonding acrylic adhesive
Typical Applications
Transport vehicles, notebook computer, mobile phone and other products such as structural adhesive bonding electrons.
Bonding material: ABS, glass steel, polyester (DCPD modified) polystyrene, polyethylene ester, PVC, polyurethane, coating
Carbon steel, aluminum and stainless steel recommended HuiTian primer 1020.
Item
Unit
Typical Value
Color
Component A
White
Component B
Blue
C omponent of Basic Materials
acrylic acid
Density
Component A
g/cm 3
0.96
Component B
1.13
Viscosity
Component A
mPa*s
160000
Component B
140000
After Mixed
Mix Ratio by weight (A:B)
10:1
Handing Curing Time
Min
25
Initial Curing Time
Hour
0.5
Full Curing Time
Hour
24
Tensile Strength
After Curing
Mpa
20
Elongation at break
%
Hardness
Shore A
Volume Resistivity
Ω*cm
Dielectric Strength
KV/mm
Flame Retardant Rating
UL94 V-1
Work Temperature
℃
-55~121
Surface treatment:
Remove dust, water, oil from surface; maintain the adhesive surface clean, carbon steel, aluminum and stainless steel recommended Huitian primer to reach 1020 best bonding results.
Mixing Adhesive:
Through a fixed mixing ratio of the mixing nozzle mix, with manual, pneumatic or equipment gluing
Gluing:
This product at 18 ℃ -27 ℃ environment construction to achieve the most ideal curing effect, below 18 ℃ curing slower, more than 27 ℃ curing faster. Effects of A and B components of the viscosity is affected by temperature, in order to ensure the measurement / consistent, effect of mixing equipment, the two components in the storage temperature to maintain a constant.
Gluing work must finish in operation time. Operation before the end of time, glue and positioning of the work piece to accurately completed, then keep the work piece in a fixed state until the end to remove positioning time.
Clean:
Before curing is easier to clean, wipe the lotion, overflow adhesive residue available containing citric acid, terpene resin or NMP degreasing agent scrub in order to achieve the best results. If the layer has been cured, carefully will layer off, and wipe the lotion good cleaning effect.
Matters need attention
1.This product is flammable, away from heat and flame, spark store or use.
2.Not including the adhesive materials: PP, PE, POM, PTFE, copper, brass
3.All stainless steel, aluminum, mixing equipment be Teflon or PE material. Filler, pump shall not use copper or copper alloy. The sealing ring must use Teflon, Teflon coated PVC, PE/PP, VITON, NBR, chloroprene rubber or other elastic body shall not be.
4.This product is curing very fast, generates a lot of heat when mass mixing, and may be accompanied by release of gas, steam and other volatiles. Therefore, should be in every time limited quantity in mixed operation time can run out, and the adhesive thickness is controlled within 3.2mm
Package
50ml/ Double tube, 12 double tube /carton.
380ml/ double tube, 12 Double tubes /carton
Storage
1.Store it in dry and shady places at the temperature of 12~24℃ is best
2.A component Ø Storage life: 12 months,,B component 9months
3. Could not frozen storage
7595 RTV Silicone Sealants Weather Resistance For Flange Joint Surface Seal
RTV 7595 silicone sealants, weather resistance, used for flange joint surface seal
Instructions:
1. Clean the thread surface, eliminate greasy dirt and dry it.
2. Squeeze a certain amount of glue into one of plane, form a continuous glue line, girding the parts to
sealing. Suggest to pneumatic pressure no more than 0.4 MPa.
3. Fold and seal two surfaces with bolts; initial curing within an hour, at 25 ℃, 50% humidity, completely cured in 24 hours. In cold or dry condition needs much longer time to cure.
4. If the glue not use up, please tight blocks and sealed nozzle immediately. If there is a little crust in the
mouth of tube, remove it, it will not affect the normal use.
Packing specification:
310ml/cartridge, 30 cartridges/ carton
Announcements:
This product must be stored far away from children.
If you carelessly touch eyes and skin, please wash it with water immediately.
Storage:
Stored in 8~28℃ cool and dry place. Shelf life is 12 months.
9060S Black Silicone Sealant For Substrates Cure And Adhesion
9060S black silicone for cure and durable adhesion to a variety of substrates without primer.
FEATURES
9060S (former model No. was 906S) is a black, slightly slump silicone adhesive / sealant designed for applications where non-corrosive cure and durable adhesion to a variety of substrates without primer.
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air
Oxime cure system
Slightly slump.
Good adhesion
Excellent dielectric properties
Stable and flexible form -60℃ to +250℃
HANDING PRECAUTIONS
Product safety information required for safe use is not included. Before handing, read product and safety data sheets and container labels for safe use, physical and health hazard information
STORAGE
When stored at 8- 28℃ in the original unopened containers, this product has a usable life of 9 months from the date of
production.
Special precautions must be taken to prevent moisture from contacting this material.Containers should be kept tightly
close.
APPLICATIONS
Sealing and bonding applications where non-corrosive cure is required.
Applicable to adhesive/seal of general industrial assembly.
TYPICAL PROPERTIES
Property Standard Unit Typical value
Color / / Black
Appearance / / Slightly slump
Density(25℃) GB/T 13354-1992 g/ml 1.25
Skinovertime
(25℃,60%R.H)
GB/T13477.5-2002 min 20
Thephysicalpropertiesbelow,curedafter7daysat25℃and 60%R.H.
Hardness GB/T 2411-2008 Shore A 30
Elongation GB/T 528-2009 % 300
Tensile strength GB/T 528-2009 MPa 1.30
Shear bond strength
(Al-Al)
GB/T 13936-1992 MPa 1.20
Temperature range / ℃ -60℃-+250℃
Volumeresistivity GB/T1692-2008 Ω·cm 1×1014
Dielectricstrength GB/T1695-2005 kV/mm 18
Black PU Sealant Sausage HT8924 For Cars And Truck
high performance Black PU sealant sausage, HT8924 for cars and truck use
Description:
8924 high performance polyurethane sealant is a single component, W High thixotropy, does not flow, low odor polyurethane adhesive. Product is low viscosity, good thixotropy, which is convenient for manual gluing. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance. Can be painted, polished, no corrosion, elevation and top construction does not flow. There is extensive adhesion to various substrates.
Typical use
Seal bus air conditioning, weld, luggage and other parts. Deal ships, locomotives, construction, paint and other industries and other usage of low bond strength.
Characteristic before curing
Color: White/black/grey/iron grey
Density g/cc: 1.30g/cc
Tack Free Time(min) 50
(23 ℃ /50%RH)
Characteristic after curing
Tensile strength MPa: 1.8
Elongation at break (%): 500
Tear strength KN/m: 8
(GB/T 529)
Harness: ShA: 40
(GB/T 531-1999)
Work Temperature ℃: -40~90
Instructions for use
Surface cleaning: clean surface: remove the rust, dirt, water and oil etc...
Gluing : cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.
Curing : a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.
Polyurethane adhesive in gluing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.
Storage : unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.
Package
310ml/Cartridge, 24Cartridges/Carton
600ml/Sausage, 20Sausages/Carton
Storage
Store in cool and dry place 5-25 C (humidity less than 70% RH)
Storage period: Cartridge pack for 9 months
Sausage pack for 6 months